Anlapus C680 Pro2 5MP Window Camera (AWK-6805HM Series) - FAQ & Setup Guide – Anlapus

Product Overview

The Anlapus C680 Pro2 is a 5MP wireless window camera designed for no-drill, adhesive-free installation on glass surfaces. With its F1.0 large aperture lens, it delivers full color night vision without additional lighting. The magnetic mounting system makes installation and repositioning effortless.

Available SKU / Pack Options

Model Number	Pack Size
AWK-6805HM-1P-US	1-Pack
AWK-6805HM-2P-US	2-Pack
AWK-6805HM-4P-US	4-Pack

What's in the Box

C680 Pro2 Window Camera × 1 (or per pack quantity)
Magnetic Adhesive Pad × 1
Angle Adjustment Plate × 1
USB Type-C Cable (3m / 9.8ft) × 1
User Manual (English/Spanish)

Note: Power adapter is NOT included. Please use a 5V/2A USB adapter.

Quick Setup Guide

Step 1: Download the App

Download and install VSees from:

iOS App Store: Search "VSees"
Google Play Store: Search "VSees"
Scan the QR code on the user manual

Step 2: Insert Micro SD Card (Optional but Recommended)

Insert a Class 10 micro SD card (up to 256GB) into the camera slot before powering on. This enables local recording.

Step 3: Power On the Camera

Connect the USB cable to the camera and a 5V/2A power source. Wait for the indicator light to show the camera is ready (solid or blinking pattern — refer to manual).

Step 4: Add Device via App

Open VSees app → Tap "+" or "Add Device"
Select "Scan QR Code" (point at the camera label) or "Add Manually"
Choose your WiFi network and enter the password
Wait for the pairing to complete (you'll hear a prompt tone from the camera)
Name your camera and tap "Finish"

Step 5: Install the Camera

Clean the glass surface where you want to mount the camera (dust-free, dry)
Peel off the protective film from the magnetic adhesive pad
Firmly press the pad onto the glass surface for 30 seconds
Attach the camera body to the magnetic pad
Use the angle adjustment plate to fine-tune the viewing angle

FAQ & Troubleshooting

Q1: The camera shows offline in the app. What should I do?

Check if the power supply is connected and working (try another USB port/adapter)
Verify WiFi signal strength at the installation location (move router closer or use a WiFi extender if needed)
Confirm the camera is within range of your 2.4GHz or 5GHz network
Restart the camera by unplugging and re-plugging the USB power
Check if your router has MAC filtering enabled — add the camera's MAC address if so

Q2: I cannot find recorded video on my SD card.

Ensure the SD card is properly inserted and formatted
In the app, go to "Playback" or "SD Card Recording" tab
Check that motion detection or continuous recording is enabled in settings
If the card is new or used in another device, format it in-camera first (App → Settings → Storage → Format)

Q3: Two-way audio is not working clearly.

Ensure you have granted microphone permission to the mobile app
Check that the camera's speaker grille is not blocked
Reduce background noise near both ends
Test with the volume at about 70% for best clarity
Restart the app if audio latency or echo occurs

Q4: Motion detection alerts are not being pushed to my phone.

Open the app → Go to camera settings → Ensure "Motion Detection" is turned ON
Check notification permissions for the app in your phone settings
Adjust sensitivity level (Medium-High recommended to avoid false triggers from passing cars/trees)
Set up activity zones in the app to focus on areas of interest
Enable push notifications in the app's alert settings

Q5: The camera fails to connect to WiFi during setup.

Make sure you are entering the correct WiFi password (case-sensitive)
The camera supports 2.4GHz and 5GHz dual-band WiFi — ensure your router broadcasts these bands
Place the camera close to the router during initial setup, then move it after successful connection
Reset the camera and retry the setup process (hold reset button 10-15 seconds)
If using a dual-band router with separate SSIDs, try connecting to the 2.4GHz network first

Q6: Night vision image is dark or unclear.

Switch to "Full Color Night Vision" mode in the app settings (requires some ambient light)
For pitch-dark environments, enable IR night vision mode in the app
Clean the camera lens with a microfiber cloth — smudges affect low-light performance
Ensure there are no infrared interference sources nearby (other IR devices, reflective surfaces directly in front of the lens)

Q7: How do I reset the camera to factory defaults?

A: Press and hold the reset button on the camera body for 10-15 seconds until you hear a voice prompt or see the indicator light change pattern. The camera will restart automatically and be ready for fresh configuration.

Q8: Can I view the camera from multiple phones?

A: Yes. Download VSees on each device, log in with the same account, and all cameras under that account will be visible. You can share the camera with family members through the "Share Device" feature in the app.

Q9: How long can the built-in battery backup last?

A: The 5000mAh built-in battery provides backup power during power outages — typically lasting 30-60 minutes depending on usage (continuous recording consumes more power). It is NOT designed as the primary power source; please keep the USB cable connected for normal operation.

Q10: Will the magnetic adhesive pad leave residue on my window?

A: The adhesive pad is designed for clean removal on most glass surfaces. To minimize any risk of residue, apply the pad to a smooth, clean glass surface. If you need to remove it, warm it gently with a hair dryer before peeling off slowly. Replacement pads are available separately if needed.

Q11: The video playback is laggy or buffering.

Check your network speed — 5MP streaming requires at least 2Mbps upload speed per camera
Lower the video resolution in app settings (switch from 5MP to 1080P if bandwidth is limited)
Close other apps or devices using the same network bandwidth
If viewing remotely, ensure your phone has stable cellular/WiFi data connection

Q12: Can this camera work outdoors facing outside through a window?

A: Yes! This is exactly what the C680 Pro2 is designed for — window mounting to monitor outdoor activity without installing cameras outside. For best results, mount the camera flush against the inside of the glass. Note that condensation may form between the camera lens and glass in certain weather conditions; this is normal and usually clears on its own.

Q13: What is the maximum SD card capacity supported?

A: The camera supports Micro SD cards up to 256GB. We recommend using reputable brands for reliability. Cards larger than 256GB are not guaranteed to function properly.

Q14: Does the camera support cloud storage? Is it free?

A: Yes, the camera supports optional cloud storage through the VSees app. Basic cloud plans may offer free trial periods or limited storage. For long-term recording needs, local SD card storage is recommended as the primary solution, with cloud storage as backup.

Q15: How do I update the camera firmware?

A: Firmware updates are pushed automatically through the VSees app. When an update is available, you will see a notification in the app. Go to Camera Settings → Device Info → Check for Updates. Keep your camera updated for the latest features, performance improvements, and security patches.

Important Notes

This camera is designed specifically for window mounting. Use only the provided magnetic adhesive pad for safe installation.
The adhesive pad is single-use. Replacement pads can be ordered separately if you need to relocate the camera.
Do not use abrasive cleaners on the camera lens. Use only a soft, lint-free cloth.
For outdoor-facing windows, condensation may occur — ensure proper sealing or use in a protected area.
Firmware updates will be pushed through the app. Keep your camera updated for the latest features and security improvements.