How to Install the Anlapus A62 Window Camera (5-Minute Setup)

Installing the Anlapus A62  is quick and tool-free—follow these steps:

 

1. Clean the Surface: Wipe the window/glass area (where you’ll mount the camera) to remove dust and oil.
2. Attach the Magic Sticker: Peel the adhesive backing of the magic sticker, stick one side to the camera’s back, and the other side to the cleaned glass surface. Press firmly for 10 seconds.
3. Power Up the Camera: Connect the Type-C power cable to the camera and plug it into a 5V power source.
4. Connect to APP: Open the “Instavision” APP, use Bluetooth or scan the QR code to pair the camera.
5. Adjust the Angle: Tilt the camera to your desired monitoring direction (optimal coverage: 5-10 meters).

 

Done! Your  A62 is now ready to protect your space.